Gens ace 2500mAh 7.4V 2S2P Hump RX Lipo Battery Pack with JR-3P Plug GEA2S2500RXJR

Gens ace is one of the top rank battery corporations with deep research and manufacturing on NIMH, LI-PO, LI-FE by the effort of 200 professional engineers and technicians with 20 years exquisite battery technology. The Gens ace brand holds the traditional concept of "excellent quality", "Optimization"& "Priority" on Sales & Services. All batteries are tailored for various scales of the RC Models such as electronic cars, nitro cars, airplanes, vessels and also other models, toys, electric tools, electric bikes, electric autos, digital products etc.

Features:

- Stable automatic stacking technology enables single-cell capacities of 2500mAh
- Provides stable voltage until the end of your mission.
- Specially adapted to each UAV type.
- High according to capacity/weight.
- Standard JST-XHR-3P Balance Plug + Equipped with industry-standard JR-3P Plug

Specifications:

- Capacity: 2500mAh
- Voltage: 7.4V / 2S2P / 4 Cell
- Weight: 97.5g
- Size: 57mm x 30mm x 30.3mm (L x W x H)
- Connector Type: JST-XHR-3P

Applications:

Gens ace batteries provide high quality, reliable power for your Multirotor FPV or Aircraft.

NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.

Pit Stop Hobby and E Johnson will not be held liable for and loss, damage, injury or death for either proper use or misuse of a battery or charging product.